Welcome To - Taizhou Huangyan Yige Machinery Co., Ltd.!Home - contact us - Online Message

Call Us on

contact us

Company Name: Taizhou Huangyan Yige Machinery Co., Ltd. Contact: Manager He Phone: 15967672923
Company mailbox: 2562261439@qq.com
Company Address: Shangye Industrial Zone, Jiangkou Street, Huangyan District, Taizhou City

Industry knowledgeYou are here: Home - Industry knowledge - Content
Some important operating specifications of fully automatic blow molding machine
Edit:Taizhou Huangyan Yige Machinery Co., Ltd.   UpDate:2018-09-14

The necessary knowledge for the safe operation of the automatic blow molding machine is as follows:

1. Lubricant must be added to each moving part before each shift is started. (Eg: manipulator, manipulator guide, mold opening and closing guide)

2. Swing arm can be added once every 3-4 days. The warmer big chain and small chain can be added once a month. Frequently check whether the reducer of the main engine and the reducer of the heater is short of oil. The main bearing can be added every 3 months.

3. Check whether the high-pressure gas source, low-pressure gas source, power source, and water source are normal.

4. Check whether each emergency stop switch, safety door switch, and protection device detection switch are normal.

5. Before production, check whether the moving parts are firm, whether the screws are loose and fall off, the focus is on the place where the impact is strong, and whether the belt drive part is abnormal.

6. Check whether each pneumatic component is leaking, and whether the action is sensitive.

7. Check whether the triplet is leaking abnormally, whether it is blocked, and whether the water storage capacity of the water cup is too full.

8. Check whether the heating head enters the embryo and whether the embryo is working properly. If the insert is not in place, the nut can be adjusted.

9. Check whether the tube is damaged or broken. To be replaced in a timely manner.

10. When there is an abnormality in the solenoid valve of the automatic blow molding machine, it should be cleaned in time (cleaning once every 3.5 million bottles).

After years of development and development, Taizhou Huangyan Yige Machinery Co., Ltd. has a number of blow molding machine technology patents, and a specially developed one-to-two high-speed, energy-saving, fully automatic bottle blowing machine, leading the domestic production of linear machines with single cavity. The company is a professional manufacturer of bottle blowing machines, plastic bottle blowing machine manufacturers, plastic mold manufacturers, injection mold factories. Mainly provide plastic bottle blowing machine, automatic bottle blowing machine, automatic hydraulic bottle blowing machine, bottle embryo mold, bottle cap mold, bottle blowing mold and so on.