Welcome To - Taizhou Huangyan Yige Machinery Co., Ltd.!Home - contact us - Online Message

Call Us on

contact us

Company Name: Taizhou Huangyan Yige Machinery Co., Ltd. Contact: Manager He Phone: 15967672923
Company mailbox: 2562261439@qq.com
Company Address: Shangye Industrial Zone, Jiangkou Street, Huangyan District, Taizhou City

Industry knowledgeYou are here: Home - Industry knowledge - Content
Features of Fully Automatic Blow Molding Machine
Edit:Taizhou Huangyan Yige Machinery Co., Ltd.   UpDate:2018-10-11

Features of Fully Automatic Blow Molding Machine

Automatic blow molding machine is a very common production machine, widely used in the production of plastic bottles in related industries. The automatic bottle blowing machine will inevitably encounter some deviations in the fully automatic production, and it should be caused that the weight of the bottle is different. After all, the machine will inevitably have some small errors, but we are looking for these subjective factors in addition Find some other objective reasons, because these objective reasons seriously affect the accuracy of the weight of the bottle.

The advantages and characteristics of the automatic blow molding machine in its own design and application: 1. Reasonable design and automatic control, greatly reducing power consumption and manpower; 2. Automatic tube blanking system; 3. Infrared preheating and heating The box is used to preheat the tube blank; 4. The production process is fully automated, which has the advantages of less investment, quick results, convenient and safe operation and maintenance. Inaccurate temperature control or large temperature deviation, the installation position of the temperature measurement point (thermocouple) is unreasonable, which causes periodic temperature deviation. As the temperature deviation amplitude increases, the deviation affecting weight also increases. When the temperature rises, the extrusion barrel stretches more. In the same operating cycle, the spout at the bottom of the bottle increases and the weight of the product decreases. When the temperature is low, the weight of the product increases. When the thermocouple has a poor contact, there is a similar failure. If the thermocouple is bad, the amount of extrusion decreases, and when the temperature is lower than the melting point of the plastic, the motor current increases.