Welcome To - Taizhou Huangyan Yige Machinery Co., Ltd.!Home - contact us - Online Message

Call Us on

15967672923
15967672923
Category
contact us

Company Name: Taizhou Huangyan Yige Machinery Co., Ltd. Contact: Manager He Phone: 15967672923
Company mailbox: 2562261439@qq.com
Company Address: Shangye Industrial Zone, Jiangkou Street, Huangyan District, Taizhou City

newsYou are here: Home - news - Content
Blow molding machine manufacturers teach you how to better maintain and repair the blow molding machine
Edit:Taizhou Huangyan Yige Machinery Co., Ltd.   UpDate:2019-01-25

China's bottle blowing machine industry is now close to world-renowned companies in terms of technical production, but there is still a certain distance in brand awareness and related innovation scope. For domestic blow molding machine companies, they were also faced with the pain of industrial transformation and upgrading at that time. How to quickly complete the upgrade, the need to find a breakthrough point.

1 No feeding at the feeding level: check several conditions: whether the hopper is out of material, if it is: the need to quickly add the material is not: check whether the control contactor of the raising machine is in the power-on state, if it is the power-on state, quickly Check to see if the motor is receiving power and loading. Because this condition is likely to be caused by the preform (embryo) getting stuck, the simple way is to help improve it manually. If you check that the control contactor of the raiser is not powered, check whether the detection eye of the preform is not on the same line as the reflector.

2 Feeding old card feed tray: This situation is a headache. From experience, if the length of the preform (embryo) is longer and the weight is larger, then this phenomenon is relatively small.

3 After the bottle is blown, it cannot be removed from the mold. First of all, the mold should be opened, and the mold should be opened and closed manually. If it is normal, run it in the dry running state, if it is normal. Please check your exhaust timing settings. If the exhaust settings are normal and if you blow the bottle every time, then you can judge the problem of the exhaust valve. Please open the exhaust valve to check the condition of its springs and seals (this Another problem is that the exhaust sound is relatively loud or there is an unclean sound). If you encounter a situation where many molds are produced normally, and you can't open the mold occasionally, please check if there are screws in the clamping pin, and please check if the clamping force is too large. Standard readjusted.

4 Is the bottle always pinching the manipulator?

Our blow molding machine manufacturers believe that energy saving and consumption reduction is a very important breakthrough. At that time, energy has become a bottleneck for the development of the whole society. How can the blow molding machine manufacturers not affect the premise of the original blowing power and quality during the production process? In order to reduce the energy consumption of blowing bottles, and achieve energy saving and consumption reduction for the production of plastic bottle companies, this will win the favor of many plastic bottle companies. Such a blowing machine will directly bring real benefits to plastic bottle companies. Cost savings and increased profitability. Another breakthrough is, of course, the innovation of the blow molding machine products. According to the existing defects in the existing market of the blow molding machine, through market research, understand the needs of users, improve and innovate the products, and become the industry leader. Useful means for the competitiveness of the blow molding machine itself

Mobile