Welcome To - Taizhou Huangyan Yige Machinery Co., Ltd.!Home - contact us - Online Message

Call Us on

contact us

Company Name: Taizhou Huangyan Yige Machinery Co., Ltd. Contact: Manager He Phone: 15967672923
Company mailbox: 2562261439@qq.com
Company Address: Shangye Industrial Zone, Jiangkou Street, Huangyan District, Taizhou City

newsYou are here: Home - news - Content
Bottle blowing machine manufacturers teach you how to operate and maintain
Edit:Taizhou Huangyan Yige Machinery Co., Ltd.   UpDate:2019-06-18

I trust that most people know how to use the blow molding machine, but the detailed operation and maintenance methods are not very well understood. Below we blow molding machine manufacturers take you to understand the operation and maintenance of the blow molding machine. The preform (embryo) is illuminated by infrared high-temperature lamps, which heats and softens the preform (embryo) body of the preform (embryo). In order to maintain the shape of the bottle mouth, the preform (embryo) mouth does not require heating, so a certain amount of It is cooled by a cooling device.
2. Blow molding This stage is to place the pre-heated preform (preform) into the existing blow mold, inflate it with high pressure, and blow-draw the preform (preform) into the required bottle. The fully automatic bottle blowing machine completes the two operations of the bottle blowing through the operation of the manipulator, eliminating the need for the center to manually put the preheated preform (preform) into the blowing mold. Greatly accelerated the rate of production.
Operating Specifications 1. Before each shift is started, the moving parts must be lubricated once. (Manipulator, manipulator guide, mold opening and closing guide)
2. The arm can be added once every (3-4) days. Warm machine large chain and small chain can be once a month. Frequently check whether the reducer of the main engine and the reducer of the heater is short of oil. The main bearing can be added every 3 months.
3. Before production check whether the moving parts are strong, whether the screws are loose and dropped, especially if the impact force is strong, and the belt drive part is abnormal.
4. Check whether the high-pressure gas source, low-pressure gas source, power source, and water source are normal.
5. Check whether the emergency stop switch, safety door switch and maintenance equipment detection switch are normal.
6. Check whether the heating head enters the embryo and whether the operation of the embryo is normal. If the insert is not in place, the nut of the pressing equipment can be dispatched.
7. Inspect the lamp tube for damage and cracks. To be replaced in a timely manner.
8. Check whether each pneumatic component leaks air and whether it is active.
9. Check whether the triplet is abnormal and leaking, whether it is blocked, and whether the water storage capacity of the water cup is too full.
10. When the solenoid valve of the automatic blow molding machine is abnormal, it should be cleaned in time.