Welcome To - Taizhou Huangyan Yige Machinery Co., Ltd.!Home - contact us - Online Message

Call Us on

15967672923
15967672923
Category
contact us

Company Name: Taizhou Huangyan Yige Machinery Co., Ltd. Contact: Manager He Phone: 15967672923
Company mailbox: 2562261439@qq.com
Company Address: Shangye Industrial Zone, Jiangkou Street, Huangyan District, Taizhou City

newsYou are here: Home - news - Content
Plastic mold factory share maintenance tips
Edit:Taizhou Huangyan Yige Machinery Co., Ltd.   UpDate:2019-10-16

The maintenance and maintenance of production products have always been strictly controlled by professional injection mold factories. Today, we will introduce the maintenance and maintenance knowledge here.

The bottle cannot be taken out of the mould after blowing

Generally, you choose the type of blow molding machine based on the product you need. For manufacturers with different dosages, it is generally important to pay a few cavities, the size of the bottle capacity, and the output value per hour. It is critical to choose the type that suits your needs based on your needs.

2. Feeding level without feeding: check several conditions. Whether the hopper is out of material now, if it is: you need to add the material as soon as possible. No: Please check whether the control contactor of the hoist is in the power-on state. If it is, check whether the motor is in the power-on state and load the state as soon as possible, because this state is likely to be blocked by the preform (embryo). Belt, the simple method at this time is to help ascension manually. If you check that the control contactor of the hoist is not energized, check whether the detection eye of the preform is not on the same line as the reflector.

3. Feed the old card and feed tray: This situation is a headache. From experience, if the length of the preform (embryo) is longer than the long-cut component, then this phenomenon is relatively small.

Moreover, many manufacturers already have the ability to design and produce independently, and can customize the required models according to customer requirements. Our company has a huge factory building to allocate the processing and production of various components, plus a good after-sales service system to provide customers with Careful technical support.

After years of pioneering and development, our factory has a number of blow molding machine technology patents, and a specially developed one-out, two-speed, energy-saving, fully automatic bottle blowing machine, leading the domestic production of linear machines with a single cavity. The three major series currently produced, more than 20 varieties of bottle blowing machines sell well all over the country, and are exported to West Africa, Southeast Asia, Russia and other countries.


Mobile